XE800D is equipped with a 5.2m³ rock bucket as standard, which is mainly used for coal seam roof blasting and material digging and loading operations. Digging 426m³ per hour, the fuel consumption per unit is 0.137L/m³, the digging efficiency is 13% higher than that of a 75-ton excavator on the same site, and the fuel consumption per unit is 4% lower

XCMG XE800D adopts the international advanced dual-pump and dual-circuit cooling system. The water and oil cooling speeds can be independently controlled, fully adapting to different ambient temperatures ranging from -15°C to 40°C.

The dust in the mining area is large, and the high dust greatly affects the wear of the equipment. The air intake system of  XE800D adds an exhaust gas dust ejection device to realize automatic dust removal by the air filter, reduce dust accumulation, improve the service life of the filter element, reduce the use cost of the equipment, and have a higher cost performance ratio.

XE800D matches XCMG XEICS intelligent management system, adopts communication and Internet of Things technology, realizes digital sharing of machine information, mobile phone viewing, and dynamically grasps equipment information at any time.

Mine construction is noisy and dusty. XCMG XE800D adopts a positive pressure cab, which improves the airtightness by 70%, effectively isolates dust and noise, and enhances the operator's experience. Efficiently reduce operator fatigue.

As a new generation of 80-ton mining excavator developed by XCMG, it can be equipped with a variety of working devices such as rippers, rock arms, breakers, etc., excavating, stripping, and crushing "one machine conversion"

 Reprint from network